We specialize in the R&D, design and manufacturing of hardware and software products for power safety, energy saving, power distribution and smart energy.
Categories
Popular Products
JL-SVG Static Var Generator
The JL-SVG series Static Var Generator is available in two configurations: wall-mounted and rack-mounted. The SVG is a static var compensator based on power electronic converter technology.
Product Overview
The JL-SVG series Static Var Generator is available in two configurations: wall-mounted and rack-mounted. The SVG is a static var compensator based on power electronic converter technology. Its operating principle involves connecting a voltage-source converter in parallel to the power grid via a reactor; by precisely adjusting the phase and amplitude of the converter's AC-side output voltage, the device can absorb or generate the required reactive current to achieve dynamic reactive power compensation while simultaneously monitoring system harmonics. It is capable of both reactive power compensation and the balancing of three-phase active power loads.
Technical Specifications
| Rated operating voltage | AC 380V ±20% |
| Operating frequency | 50Hz ±5% |
| Overload capacity | 1.2 times rated capacity for 1 minute |
| Switching frequency | 16kHz |
| Total response time | <10ms |
| Power loss | ≤2.5% |
| Noise level | ≤60dB |
| Communication | Dual RS‑485 interfaces (supports GPRS/Wi‑Fi wireless communication) |
| Unbalance compensation performance | With sufficient capacity, the post‑compensation current unbalance is less than 3% |
| Filtering performance | Filtering range covers the 2nd to 25th harmonics; with sufficient capacity, the compensation rate meets or exceeds the requirements of GB/T 14549‑1993 |
| MTBF (Mean Time Between Failures) | ≥100,000 hours |
Environmental Conditions
① Altitude: Below 1,500 meters; Ambient temperature: -20°C to +50°C;
② Relative humidity: Monthly average maximum relative humidity of 90% (with a monthly average minimum temperature of 25°C), with no surface condensation;
③ Installation site must be free from hazardous substances such as flammable, explosive, or corrosive gases and liquids; Seismic intensity: Below Level 6;
④ Pollution level: Class III or lower.
Note: Customization is available for other special applications or environmental conditions.
More Products
Get a Free Quote
Feel free to contact us —
we strive to earn your trust.